Description

 Point Specifications;

• Radii; 481mm (19").
• Angle; 15deg.
• Point length; 124mm (4-7/8").
• Frog power ON/OFF (change screws on base to suit your needs).
• Power routing or Non-power routing (change screws on base to suit your needs).
• Cast metal frog.

Contents:

• 1 pc 124mm Point/Turnout.
• 1 pc Radii 481mm (19") 15deg curve.
• 1 pc Each S60 (60mm) left & right cut straight.
• 2 pcs 64mm straight.
• 1 pc point power lead 90cm (35").
• 2 pcs Custom insulated unijoiners.

(Extra track parts are included to help with maintaining good track spaceing/geometry in the most common layout designs)

All Unitrack points come fitted with the point motor built into the base of the point.

Unlike other track systems the point motors work on a 2 wire 12 volts dc voltage and needs a 24-840 point switch to work properly.

The point lead-cable can be extended by using 24-841 90cm (35") extension lead.

All Unitrack points can be operated manually, by the sliding switch next to the point blades.

Unitrack #4 points are 124mm long & have track centres of either 33mm, 49.5mm or 66mm depending on how you set them up.